Bisonte BTA-MT430Y, Руководство пользователя

Страница: 54 / 60

Ⅳ 、
ASSEMBLING AND ADJUSTMENT
Fig 1 Fig 2
1
、
Assembling and adjustment frame
（ Ⅱ ）
As above Fig 1 . First , unlade black knob from bolt , keep two
groove of frame
（ Ⅱ ）
conform two holes of frame( )
Ⅰ ，
and then screw
the bolt from outside to inside.
2
、
Assembly of left/right handle
As above Fig 2 .First , unlade black knob from bolt , keep two
groove of left/right handle conform two holes of frame( )
Ⅱ ，
and then
screw the bolt from outside to inside.
3
、
Assembly of throttle wire
A head of throttle wire connected to the carburetor , the other head
connected the throttle lever Assy . First , adjust the throttle lever at the
bottom , and then insert the big head of throttle wire to the hole of throttle
lever Assy . Pull the throttle wire for putting in the groove.
Take care:turn the throttle lever handle for checking the startup . If
dissatisfied the use , you can adjust the carburetor and the bolt .
4
、
Assembly of stop switch
The long stop wire of right handle connect with the short stop cord
of the engine.
Take care:tie stop swich and throttle wire to the right handle to avoid
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
54