①
. Unlock nuts on the screw rod.
②
. Instantaneously rotate the screw rod to show the shortest part of the handle
bar.
③
. Thread the cable head into clutch plug behind the gear box assy and make
sure the head is in the big hole of the plug.
④
. Thread the steel wire-rope into the M8 hole of arm plug, and then properly
press down the clutch fork arm to insert the cable head into clutch plug.
⑤
. Rotate out the screw rod and clip it repeatedly, unlock the clutch handlebar
until spring force of clutch can reposition the bar, and then fasten the nuts.
2.
backshift cable adjustment(Picture5 and 6)
①
. Unlock the fasten nuts on the screw rod.
②
. Instantaneously rotate the screw rod to show the shortest part of the handle
bar.
③
. Thread the cable into the backshift shaft at the side of gear box and make
sure the cable head is in the big hole of shaft.
④
. Properly counterclockwise rotate the backshift fork shaft, thread the cable
into the narrow slit of backshift plug through the side of the gear box and
make sure the cable head is in the big hole of the plug.
⑤
. Rotate out the screw rod and holdfast it repeatedly, unlock the backshift bar.
When spring force can reposition the bar, you should fasten the nuts.
Ⅲ
checking and refueling
1. Check whether the connection bolts are loose or not and fasten the loose
bolts according to the bolt moment in the following table3 (gasoline engine
bolts and nuts moment is in gasoline engine instruction).
Table 3
www.italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
97