Adjust
operation parts
0
Friction plate
of clutch
0
Gears and
bearings
0
Ⅳ
.Long-period storage of tiller
When tiller needs storing for a long period, the following measures should
be taken to prevent tarnishing.
1. Keep gasoline engine with seal according to its instruction.
2. Wash oil stain and clean dust on the machine.
3. Drain lube oil in the gear box and refuel new oil.
4. Paint pickling oil on non-aluminum parts where there is no paint.
5. Store tiller in the dry, safe place where there is enough aeration.
6. Properly keep the attaching tools, certificates of conformity and
instruction of tiller.
Chapter 5. Debugging method of
tiller
Ⅰ
Debugging method of bevel gear assy:
When bevel gear drives abnormally with loud
noise, you should check and debug it immediately.
The debugging methods are as follows:
1. Bevel gear clearance debugging of gear
box(look at picture10)
①
when bevel gear assy clearance
△﹤
0.05,
you should increase clearance between
gear box and running gear box with
steel
gasket.
②
When bevel gear assy clearance
△﹥
0.3,
one should adjust the range 0.05
~
0.10
between the bearing and gear
Ⅱ
shaft.
2. Bevel gear clearance assy debugging of
running gear box(look at picture11)
①
when bevel gear clearance
△﹤
0.05,you
should adjust the gasket range 0.2
~
0.3 to
increase clearance. Meanwhile, you
should change steel gasket
Ⅱ
and adjust gasket
Ⅲ
to ensure clearance
of gear
Ⅱ
shaft is 0.05
~
0.15.
②
When bevel gear assy clearance
△﹥
0.3, you should decrease gasket
Ⅰ
,
www.italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
110