1
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
Customer Service
(800) 247-7668
1. Assemble Soccer Goal per separate instructions provided.
2. Unpack and lay out two
Crossbars
(A), one
Inner Tube
(B), and one
Connecting Bar
(C) on a flat surface.
Slide the
Connecting Bar
(C) into the
Inner Tube
(B) through the channel so that all the holes are lined up.
Insert the
Inner Tube
(B) into one of the
Crossbars
(A) leaving half of the
Inner Tube
(B) exposed. Install
two
3/8” x 1” Hex Bolts
(E) loosely. Insert another
Crossbar
(A) onto the exposed half of the
Inner
Tube
(B). In the farthest exposed hole loosely install one
3/8” x 1” Hex Bolt
(E). See Figure 1.
3. Insert the head of a
5/16” x 1” Carriage Bolt
(F) into the net attachment track and slide over the joint where
the
Crossbars
(A) meet. Install the
3/8” x 1” Hex Bolt
(E) and tighten all
3/8” x 1” Hex Bolts
(E).
See Figure 1.
4. From each end of the
Crossbar
(A) insert and slide the head of a
5/16” x 1” Carriage Bolts
(F) approximately
17-5/16” from the end.
5. Lay the soccer goal assembly down in position directly below the
Crossbar
(A) with the net attachment track
facing upward. On the soccer goal temporarily remove one of the
3/8” x 1” Hex Bolts
(E). Insert the heads
of three
5/16” x 1” Carriage Bolts
(F). Slide the
5/16” x 1” Carriage Bolts
(F) approximately 21-5/16” in
measuring from the outside of the soccer goals upright. The middle one should be centered. Reinstall and
tighten the
3/8” x 1” Hex Bolt
(E)
in the soccer goals crossbar. See Figure 2.
6. Place
the
Football Crossbar Support Brackets
(D) over the
5/16” x 1” Carriage Bolts
(F). Using the
5/16”
Flat Washer
(G), and
5/16” Nylon Lock Nuts
(H) tighten the
Football Crossbar Support Brackets
(D) to the
crossbars.
7. Using the pilot holes provided in the
Football Crossbar Support Brackets
(D) drill a 5/16” hole through the
bottom of the
Football Crossbar Support Brackets
(D) and through one wall of the crossbars. Using the
3/8” x 1” Thread Cutting Hex Bolts
(I) to fasten the
Football Crossbar Support Brackets
(D) to the upper and
lower crossbars (48 places).
NOTICE!
Use care when tightening the
3/8” x 1” Thread Cutting Hex Bolts
(I).
Do not over tighten!
See Figures 2 and 3.
—— Instruction Manual ——
S
HOOT
O
UT
C
OMBO
A
LUMINUM
F
OOTBALL
S
OCCER
G
OAL
K
IT
B
ISON
M
ODEL
: SC2480IGAFB,
OR
SC2480PA44FB
Date: 10/16/2013 Rev: 1 B.A. N.J.C. File: \publisher\instructions\SC2480AFB Ref#: 860166
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
4
Crossbar
G
12
5/16” Flat Washer
B
2
Inner Tube
H
12
5/16” Nylon Lock Nut
C
2
Connecting Bar
I
64
3/8” x 1” Thread Cutting Hex Bolts
D
6
Football Crossbar Support Bracket
J
4
10’ Upright
E
8
3/8” x 1” Hex Bolt
K
4
Upright Support
F
12
5/16” x 1” Carriage Bolt
Содержание ShootOut Combo SC2480IGAFB
Страница 3: ...3 Figure 4...
Страница 6: ...3 Figure 1 Assembled Figure 2...
Страница 7: ...4 H A C I B C H B F F I G G F G B J J Figure 3...
