4
1.
Loosen top net cable. Use the net height adjustment crank to adjust the inner poles to the desired height
indicated by the height markings machined on the inner poles See Figures 1and 3.
2.
Adjust
Nylon Net Collars
(J) so that they are 2”
-
3” below the bottom of the net. Crank top rope tight with
the
Winch
(H), then pull bottom rope tight through the
Rope Ratchet
(N). Reattach
Rope Ratchets
(N),
center the net between poles as in previous instructions and apply desired tension. See Figures 2 and 3.
Height Adjustment for a Single Court System
NOTE:
Excessive tightening of top rope is not necessary. Crank the winch until poles start to flex. Further tensioning
results in lowering of the top rope. Achieve proper height using the inner pole adjustment and to achieve proper
net tensioning use the rope ratchets.
Both Nets the Same Height
1.
Remove tension from both nets with the
Winches
(H).
2.
Adjust all three poles by cranking the net height adjustment crank to the desired height. See Figure 4.
3.
Tighten both nets using the
Winches
(H), retighten bottom ropes and reinstall and tighten
Rope Ratchet
(N)
See Figure 4.
Height Adjustment for a Side by Side Court System
37' CENTER TO CENTER
37' CENTER TO CENTER
Figure 4
