Bison 326517170100, Руководство пользователя

Страница: 8 / 19

–2–
Table II.
Size
S
A B H L M d I k For vices 6517
1 140 170 28 195 M12 25 18 14 100
2 175 206 28 236 M12 25 18 14 125
3 224 256 34 294 M16 30 20 18 160
4 264 300 34 345 M16 30 20 18 200
4. Structure of the vice
Fig.3.
1. Body; 2. Moveable jaw; 3. Jaw insert; 4. Feed bar; 5. Mandrel; 6. Eccentric;
7. Feed screw; 8. Knob; 9. Thrust bearing; 10. Support
Vice size Bearing No.
100 51204
125 51205
160 51206
200 51206
5. Operational hints
The moveable jaw of the vice (pos. 2) is shifted with feed screw (pos. 7)
steplessly within the range limited with bar. To obtain full clamping range the
moveable jaw can be repositioned stepwise on the bar. The clamping effect is
realised with feed screw. On the vice body below the feed bar there is a
countersink marked red, which should be invisible if the workpiece is properly
clamped in the vice (fig. 4a).