Bism 4GS Dive Demo Solis, Руководство по эксплуатации, Страница: 62 / 140

LOG MODE ( LOG )
■O2 Profile Save Settings
On the O2 profile save setting screen, you can
set whether to save the O2 bar graph information
when displaying scuba diving dive profile data.
It can be set to ON or OFF. (Default: OFF)
When OFF (default), O2 bar graph is not
displayed in the dive profile Adata display.
○
Enter the O2 Profile Save Settings Screen
1)
Depress M button on the sampling rate setting screen.
2)
Depress P button to set “ON” or “OFF”.
3)
Depress A button to complete the setting.
[ Note ]
●The O2 profile save setting is "OFF" by default.
●When the O2 profile save setting is set to "ON", the O2 bar graph information will be saved
alternating with the N2 information at each sampling rate. (N2/N2/N2/N2 ⇒ N2/O2/N2/O2)
Therefore, in the N2 bar graph display, the N2 information replaced with the O2 bar information
is displayed as temporary data. Similarly, when displaying the O2 bar graph, the O2
information in the portion where N2 was saved is displayed as temporary data.
62