6. Routine Maintenance
1. Check for rust, crack and kink in chain (Monthly)
2. Grease to rail of post for roller, lubricate grease fitting of chain bracket and
chain. (every 6 months)
3. Lubricate handle bracket pin and bearings (Every 6 months)
4. Replace hydraulic oil. (Every 12 months)
Required Volume of Hydraulic Oil
STS15
………… 0.35L
STS38, ST38WN
………… 0.69L
ST20WW
………… 0.69L
STL50
………… 0.75L
STL25, STL38
………… 0.55L
ST50, ST50WN
………… 0.94L
ST25, ST30WW
………… 0.69L
STL65
………… 0.98L
STS38
………… 0.47L
ST65, ST80, ST100
………… 1.23L
ST80WN, ST100WN
Recommended Hydraulic Oil
Esso
Unipower SQ32, XL32,
Mobil
Mobil DTE24
Shell
Caltex
Rando Oil A
7. Trouble Shooting
1. Lack of oil
Add the hydraulic oil
2. Air in the pump cylinder
Remove air
Replace Lowering Valve
2. Lowering Valve is not closed
Adjust the cable on the
Lowering Lever
3. Seating failure of steel ball
Clean or replace steel ball
Replace the O Ring
Piston Rod
1. Lowering Valve is not open
Adjust the cable on the
Lowering Lever
Lowering Lever
1. Defective Dust Seal
Replace Dust Seal
2. Wear in the O Ring
Replace the O Ring
1. Defective Dust Seal
Replace Dust Seal
2. Wear in the O Ring
Replace the O Ring
At Valve Seat
1. Wear in the O Ring
Replace the O Ring
- 5 -
Oil Leak
At Pump Piston
At Top Nut
Forks do not lower by pulling
4. Wear in the O Ring on the Piston or
1. Seating failure of the Lowering Valve
Manufacturer
Hydraulic Oil
Manufacturer
Hydraulic Oil
Trouble
Cause
Shooting
Tellus Oil 32, K32, W-R Oil 32
Natural Lowering
Forks do not rise without load