18
raising, the natural lowering prevention device is constantly rattling.
9-4. While Working
9-5. Lowering Operations
1. Check that there is nothing under the vehicle, and then lower the operations lever to release the
lowering stop hook, and then gently press the operations lever down further to lower the vehicle.
While working, make sure that the lift is raised to a height at which the lowering stop hook is
activated.
The lowering stop hook will not activate unless the upper surface of the supporter is approx.
250mm max. above the floor, so be careful.
If a vehicle looks like falling, do not try to support it, and flee from the lift.
Do not swing a raised vehicle strongly.
*Prohibit anyone other than workers from entering the lift area.
*Do not leave a raised vehicle unattended for long periods of time.
*Check that the lowering stop hook is "ON" before starting work.
Caution
Danger
Warning
Caution
*Never stand under a vehicle when the lift is operating.
*If the vehicle starts to fall, do not try to support it, and flee from the lift area.
*Do not leave any objects under the vehicle. There is a risk of the vehicle falling.
Danger
* If the lowering stop hook engages the rack (i.e.,
the hook is active), the operations lever will feel
heavy, so in this case, do not force the lowering
operation but raise the lift slightly before lowering
again.
* If stopping the lift to perform work when lowering
the lift, release the operations lever, and check
that the lever is in the "Stop" position.
Caution
Raise
Lower
(Neutral) stop
Hook release
