Perform the Pre-Operation checks before operating everyday.
1. Any damage, distortion or crack in post
2. Any damage, distortion or crack in carriage and forks
3. Smooth movement of front and rear wheels
4. Any oil leak from hydraulic line or cylinder
5. Any damage, kink or crack in chain
6. Check if brake works properly
7. Any natural lowering
8. Fastening of bolts and nuts
9. Is battery liquid at adequate level ?
10. Looseness of battery terminal
11. Is battery fixed firm ?
12. Smooth movement of Lifting & Lowering Lever. Does lever return to neutral when
released ?
(1) Lifting and Lowering
Forks can be lifted and lowered by operating Lifting & Lowering Lever.
① Forks lift up by tilting the lever towards operator
② Forks lower by pushing the lever forward.
Lifting and lowering speed can be adjusted by pushing and tilting angle.
※ Load Center is the distance from root of the
fork for the max capacity available. Refer to
the loading diagram of each model.
(2) Moving (Maneuvering)
Hold Handle and move unit carefully.
(3) Brake
Brake is installed on the right side flexible wheel.
① To Lock -
Step down the lever of the caster to lock the
brake on the wheel.
② To Release -
Pull up the brake lever by toe.
- 4 -
DO NOT use this stacker at all if repairs are required or if you suspect a malfunction.
DO NOT lift up the load or anything above the rated capacity.
DO NOT lift the load only at the tip of the forks. Lift up the
load within loading diagram(
※
) capacity.
DO NOT keep lifting with excessive slow lifting speed and continuously over 40 seconds.
Rapid lowering operation may result in load collapse and dangerous. Also rapid lowering
and sudden stop may result in impact load and damage the unit.
DO NOT move or turn around with load kept at high position.
DO NOT push Lowering Lever when moving.
Make sure to set the brake whenever the lift is not moving.
Содержание LV50WE
Страница 2: ...2...
