2. Adjusting the Lowering Speed
You can adjust the lowering speed by using the lowering adjustment dial.
Follow the procedure below to adjust the lowering speed.
①
Remove all loads from the hand pallet truck.
②
Lower the hand pallet truck to its lowest position.
③
Loosen the lock nut.
④
Turn the lowering adjustment dial.
<Guidelines>
To increase the lowering speed
Turn about 45° to the right
To decrease the lowering speed
Turn about 45° to the left
⑤
Tighten the lock nut.
⑥
Try lowering with a test load to check the lowering speed.
Caution
Turning the lowering adjustment dial disables the neutral function.
To use the neutral function, return the lowering adjustment dial to its original position.
Also, be aware that turning it too much may prevent the unit from raising/lowering correctly.
Lock nut
Lowering adjustment dial