Bischoff & Bischoff ECON XXL, Инструкция по эксплуатации

Страница: 12 / 21

07.09.2017
EN
23 22
Econ XXL
| XXL-wheelchair XXL-wheelchair |
Econ XXL
4.6. Wheels and tyres
The spoked wheels are tightened with a power socket wrench (M15) on
the chassis suspension. (fig. 27).
Drive wheels
Your „Econ XXL“ has puncture-proof PU tyres with tubes size 24x1,75“
as standard equipment. The tyres must be replaced by your authorised
dealer when they are worn or faulty.
Steering Wheels
Your Econ XXL has puncture proof PU steering wheels without a valve
7“ in diameter (fig. 28). Faulty or worn out wheels must be changed by
an qualified mobility dealer.
5. Asseccories
5.1. Anti-tipping wheels
Always use the anti-tipping wheels in pairs.
To assemble the anti-tipping wheels (fig. 29) proceed as follows:
•
First detach the rubber profiles of the tilt aid from the frame.
•
Push the round profile of the anti-tipping wheels on the side frame
pipe.
•
Now bolt the tilt protection with a screw M 6 x 35 and a self-
locking nut M6 in the designated drilling on the frame.
29
5.2. Therapy table
If the side parts are mounted in the long position then the table is
attached on the provided guides in front of the armrest. If you want to
remove the therapy table just pull it out.
At “Desk” side parts with padded armrest the table is put on with
accompanying guides and is fastened with star knob screws. To remove
the therapy table first unfasten the star screws and then pull out the
table.
5.3. Safety belt
If required, a safety belt is available as an accessory. This is fitted onto
the side frame of the wheelchair with the side part either temporarily
removed or swung away. Take the open end of the belt once around
the side frame tube and then fix it with the belt buckle.
You also use the belt buckle to adjust the length of the belt. Adjust
the belt length so that the belt is tight, but does not apply pressure.
28
27