BIRO FBC-4800SS, Руководство по эксплуатации и список запасных частей

Страница: 20 / 28

INSTALLATION INSTRUCTIONS
ALTERNATE
GROVE GEAR REDUCER
REPLACING
MORSE GEAR REDUCER
·
ALWAYS Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedures to
the Machine Before Any Service is Performed.
REMOVAL
A. Remove Item No. 51575 Drive Cover Door.
B. Remove four bolts holding the Item No. 50690 Pushbutton box to the Item No. 50757 Drive Cover and let
box hang free.
C. Remove the Item No. 50757 Drive Cover.
D. Open the motor junction box and disconnect the electrical leads. Remove the switch wires and conduit from
the motor.
E. Remove the motor from the OEM gear reducer (Morse), taking care to locate the motor key.
F. Remove the Item No. 51054 Crank Pin and Item No. 16501WB Thrust Washer from the Item No. 51384
Pitman Arm and rest at the bottom of the base access slot.
G. Loosen the Item No. 1161 Allen Screw in the Item No. 51387 Crank. Remove the Crank from the gear
reducer output shaft. This may require a puller. Keep track of the Crank Key.
H. Remove the four bolts holding the Gear Reducer to the machine frame and remove the Gear Reducer.
16