Page 6 of 24
Birko Microwave Oven - 6001096 - January 2015 v1.00
Operating Instructions
Model: 1200325
MICROWAVE
INSTALLATION
1. Make sure that all the packing materials are removed from the inside of the door.
2. WARNING
: If the door or door seals are damaged, the oven must not be operated until it
has been repaired by a competent person.
3. This microwave oven must be placed on a flat, stable surface to hold its weight and the
heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or high humidity are generated, or near com-
bustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 30cm of space above
the oven (Diagram A), at least 7.5cm at the back and 7.5cm on the left side. The right side
of the microwave oven should not be obstructed (Diagram B). Do not cover or block any
openings on the appliance. Do not remove feet.
6. Make sure that the power supply cord is undamaged and does not run under the oven or
over any hot or sharp surface.
7. This unit must not be positioned in an area that may be cleaned with a water jet and must
not be cleaned by a water jet.
8. This unit is intended for indoor use only.
9. For model 1200325, the plug and cord is a 3 pin earthed type and can be connected to a
230-240 Volt AC power supply via a 10 amp, general purpose outlet.
Diagram B
Top view
Front
7.5cm
No
obstructions
7.5cm
Side view
Diagram A
30cm
Front
7.5cm
