birddog PTZ KEYBOARD Скачать руководство пользователя

Страница: 5 / 60

•

This installation should be made by a qualified service person and should conform to all the

local codes.

•

When shipping, the device should be packed in its original packaging.

•

Make sure the power supply voltage is correct before using the camera.

•

Do not drop the device or subject it to physical shock.

Regulatory Compliance

FCC Part 15

This equipment has been tested and found to comply with the limits for digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may cause

undesired operation.

LVD/EMC Directive

This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive

2004/108/EC.

NDI® is a registered trademark of NewTek, Inc.

Содержание PTZ KEYBOARD





























































Результаты поиска

Содержание PTZ KEYBOARD

Отзывы:

Похожие инструкции для PTZ KEYBOARD

Бренды по названию

Популярные бренды

birddog PTZ KEYBOARD, Руководство пользователя

Результаты поиска

Содержание PTZ KEYBOARD

Отзывы:

Похожие инструкции для PTZ KEYBOARD

Бренды по названию

Популярные бренды