BIRD SignalHawk SH-36S-RM-ASL, Руководство по эксплуатации

Страница: 117 / 195

Spectrum Trace Logging
103
NOTE
Selecting each item above actually navigates the file structure to locate the appropriate
database file. All databases are saved with the same file name but they are all saved in
date and time stamped folders.
9. Click the OK button to load the database.
NOTE
Once the database is attached, the Adv. Logging — Logging/Playback Menu will be
displayed.
10. Perform one of the following:
•
Start logging data. See Spectrum Trace Logging .
•
Playback Logged data. See Spectrum Trace Playback
•
Search the database. See Database Search .
•
Recall and Display Saved Database Search . See Recall Saved Database Search .
Spectrum Trace Logging
Once a configuration has been created and a database has been attached, data can be logged.
NOTE
There is a 10 gigabyte limit to individual databases. Once that limit is reached, the logging will
continue without interruption and begin overwriting the oldest data in the database in 10,000
sweep segments (approximately 2 hours of trace data).
1. Click on Adv. Logging.
2. Click on Spectrum Trace Logging.
3. Click on Select Sweeps.
NOTE
The Select Sweeps Menu allows you to pick the sweeps that you would like to cycle
through while recording data. The available sweeps are generated from the
configuration file.
4. Select the appropriate data (spans and sweeps) for collection. See Select Sweeps Dialog
Box
5. Click on OK.
6. Click on Start Config.