Assembly
You will find:
•
4 curved
sections
•
2 ‘U’ sections
All connecting parts
are color-coded for
your convenience.
Lay out the parts as
shown in the
diagram.
Locate the small ‘dip’
in each curved
section and ensure
that all face the
same way (down).
Connect the two ‘U’
sections to one
another (yellow
joints). The finished
piece will form an
elongated rectangle.
Form two
semicircles from the
four curved sections,
as follows. Each
curved section has
one plain (red) end,
and either a socket
or a flattened tip at
the other (blue) end.
Connect each
flattened (blue) end
with its
corresponding blue
socket on the other
curved section.
Complete the circle
by inserting the
remaining (red) ends
of each half-circle
into the red sockets
at each corner of the
rectangle, making
sure that all four dips
in the circle-rim face
downward.
