2
OK?
3x
Designed in Switzerland / Made in China
BBC Bircher Smart Access,
BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
OK?
XRF-TI
Slide in the PCB
Close the cover again
System test mandatory!
Dispose battery acc. to local regulations
Order new battery (prepared with connector)
Pull out the PCB (see 1.1.)
Disconnect (the) plug and remove battery
Insert new battery, plug in connector
2
Trouble shooting
2.1 Warning indicator for low battery voltage
(1 – 2 months to cease operation)
1.4 System check
2.2 Battery change
Check the system
by pressing the
safety edge
Every minute
Receiver
Beep
3
Technical data
Input
8.2 kOhm
Battery power
1x Lithium Inorganic 3.6 V
Battery life
Typ. 7 years
Operating frequency
868.3 MHz
4
EU Declaration of Conformity
6
Contact
5
WEEE
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.
XRF-TI is designed for the concealed installation in
the contact profiles of ExpertSystem (see assembly
and mounting instruction).
However it can be wired with other saftey edges
eg. where space is limitted.
1.3 Mounting
Sensing
edge
Built-in
(e.g. sliding gate)
Surface mount
(e.g. industrial door with ClickLine)
To find out which transmit-
ter has low battery
voltage: Press each edge.
Battery good
Battery bad
Beep
Sensing edge
XL
