Birch BP002 Series, Руководство пользователя

Страница: 40 / 64

BP-002 User's Manual
- 34 -
The method is that press FEED button and power on the printer, the ERROR LED blinks three times,
and then loosen the button, and the function is finished and turn off the printer.
3.5 Setting Slip Stitch (UPDATE and BOOT)
Slip Stitch is used to upgrade printer firmware. In normal working condition, BOOT slip stitch should be
pulling out while UPDATE slip stitch should be plugging into.
3.6 Online-aptitude Parameter Settings
BP-002 supports the function of online-aptitude parameter settings, which can be set in the PC with
the driver installed in.
The concrete setting steps are shown as follows:
1. Make sure that the computer and the printer are connected with a cable and both the computer and
the printer are turned on, the printer should be in normal working condition as well.
2. Under the operation systems of WIN 2000/WIN XP/VISTA/WIN7, Click “Start” → “Settings” →
“Printers”.
Under the operation system of Windows 8, click “Desktop” in the main panel firstly, and then double
click and enter the window of “Control panel”, click “Hardware and Sound” to find “Devices and
printers”, at last, open the window of “Devices and printers”.
3. Right click “BP-002”, select “Properties”.
4. Click “Printer settings” in the Properties page.
When Pulling Out
When Plugging Into
Slip Stitch Cap
Slip Stitch
Note: Do not change the Slip Stitch without any permission of the factory, or the printer can
not work.