Birch BP002 Series, Руководство пользователя

Страница: 39 / 64

BP-002 User's Manual
- 33 -
Chapter 3 Control Panel
3.1 Control Panel
There are three LED indicators and one key on the control panel shown as Figure 3-1.
3.1.1 LED Indicator
LED Description
POWER (Green)
Denotes whether the printer’s power supply is connected or not. The LED is on
when the power is connected.
ERROR (Red) Denotes printer’s status. The LED is on when the malfunction appears.
PAPER OUT (Red)
Denotes printer’s paper status. The LED is on when paper out occurs or is
about to end.
3.1.2 Key
Key Function
【
FEED
】
【
FEED
】
controls paper feeding, you can enable or disable the key function with a
command. When enabled, the paper will be fed continuously if you press and hold on
it, or stop if you loosen it.
3.2 Self-Printing
Self-printing lets you know if the printer is working properly. If the printer printouts the self-test content
normally, it denotes that there is nothing wrong with the printer except for the interface connecting to the
computer. Otherwise, the printer should be repaired.
Hold down the FEED button and turn on the power switch while the printer cover is closed, the ERROR
LED blinks once, loosen the button, then the printer will print out self-test information such as the
software version, update date and interface etc.
3.3 Hex Dump Printing
This function allows you to check whether the connection between the printer and the computer or
terminal device works properly or not.
The method is that press FEED button and power on the printer, the ERROR LED blinks twice, then
loosen the button. Turn off the printer when you want to exit this print mode.
3.4 Restoring Factory Default Settings
The function is to clear the settings stored in the printer and to restore the factory settings for
correlative parameters.
Figure 3-1 Control panel
Caution: Refer to chapter 6.2 Error message on the control panel for detailed information
about LED indicators malfunctions.