BIQU BIQU-Hurakan, Руководство пользователя

Страница: 61 / 62

61 / 62
WWW.BIQU3D.COM
Question 8 The extruded filaments look uneven or
have different thicknesses:
Answer 8
Check if the filament is jammed or tangled.
Check whether the nozzle is blocked.
Wrong settings on the layer height or on
the filament width.
Filaments are of poor quality.
Question 9 Stringing:
Answer 9
Try increasing the retraction distance by
1mm and test again to see if the
performance improves.
Check the retraction speed. Retraction
works best between 20 and 100mm/s. In
order to set the most ideal value, it is
necessary to set different speeds through
experiments to observe whether the
stringing phenomenon is reduced.
Adjust the extruder temperature. Try
decreasing your extruder temperature by
5
℃
each time to get the best value.
Reduce the floating movement distance.
That is to say, when printing multiple
models, the distance between models can
be shortened appropriately.