BIOTRONIK Reocor S, Техническое руководство, Страница: 20 / 42

17
Fr
a
n
ç
a
is
English
Česky
Españ
o
l
It
aliano
Nederlands
Pol
s
k
i
P
o
rtuguês
Magy
ar
Deu
tsc
h
Note: For use of cables or adapters for dual-chamber applications,
the leads must be connected to the ventricular channel
(labeled Ventricle or V).
Note: Do not connect the patient cable to the temporary pacing lead
of the patient before the connection has been established to
the Reocor S.
Direct connection
If Reocor S is used without the Redel adapter, temporary
catheters and heart wires can be connected to the patient
cables PK-82 and PK-83 directly at the connector ports
and DIFF.-.
Patient cable
The patient cable is connected via a Redel adapter to the
Reocor S.
Fit the Redel adapter to Reocor S.
Screw the adapter in tight.
Insert the Redel plug of the patient cable into the Redel
port of the adapter.
Connection Variants
Temporary catheters with 2-mm plugs or heart wire with
2-mm adapter
You have the option to connect Reocor S directly to a tempo-
rary catheter with touch-proof 2-mm plug or to a heart wire
with 2-mm adapter, without any other cables or adapters. All
other connection options are listed in the following table:
Patient-side
connection BIOTRONIK cable Device-side
connection Reocor S connection
Recommended connections
Direct connection (without BIOTRONIK cables) 2-mm connector port
2 mm PK-67-S/L with PA-1-C Redel plug Redel adapter
Screw terminals PK-83B with TC Adapt Redel plug 2-mm connector port
Screw terminals PK-83 with TC Adapt 2-mm plug 2-mm connector port
Possible connections
2 mm PK-67-S/L with PA-1-B Redel plug Redel adapter
Alligator clips PK-141 Redel plug Redel adapter
Alligator clips PK-67-S/L with PA-4 Redel plug Redel adapter
Alligator clips PK-67-S/L with PK-155 Redel plug Redel adapter
Alligator clips PK-82 2-mm plug 2-mm connector port
394270--J_GA_Reocor_S_mul.book Page 17 Monday, January 26, 2015 4:39 PM