CardioMessenger II-S
Connection
9
Connection
Connect the CardioMessenger to the power
supply. The outlet to be used has to be easily
accessible. Use the supplied power supply unit
with electricity cable and DC plug.
Warning!
Use only the original parts included (for
details, see "Technical data", page 27).
Other equipment may impair proper
functioning of the CardioMessenger and
increase the emitted interference and the
device's susceptibility to interference.
The label on the back side of the
CardioMessenger indicates the approved
power supply units:
1. Connect the DC plug at the end of the
electricity cable to the port on the left side
of the CardioMessenger.
The connector port is
labeled with the following
symbol:
CardioM essenger_II-S_en.book Page 9 Tuesday, M ay 6, 2008 1:11 PM
