Bestscope International Limited
2-2-2 Installing the condenser illumination unit
（
figure 4
）
1.
Insert the condenser illumination unit into the bracket gently, according the figure showed in
①
②
the left.
2.
Turn the condenser illumination unit at clockwise about 90
°
, let the “AS” mark of filter
holder
③
facing forwards, and keep the screw of condenser illumination unit and the hole of the holder
in line, then screw down the bolt in the hole with the supplied hexagon spanner.
3.
Insert aviatic BNC connector plugs
④
into aviatic BNC connector jack
⑤
.
2-2-3 Installing the lamp house (figure 5)
Keep the BNC connector plugs
①
and the lamp house pin
②
in line, and keep the
bolt
③
and the condenser jack
④
in line, too. Then push the lamp house into the
illumination unit gently until they are against.
