Bestscope International Limited
BS-2090
2.2 Installing steps
Figure 3
2-2-1 Installing and replacing the lamp
（
figure3
）
Please use the specified halogen Lamp 6V30W.
1. Hold to the bulb
①
after you wrap it with
gauze or other protection materials, then depress
the plugs into the jack on the lamp house,
②
③
ensure the filament and the bolt are in a same
④
level.
2. Replacing the lamp when using or soon
after
When using, or soon after it is turned off, the
lamp, the lamp house and nearby parts will be
very hot and will cause serious burns. Please turn
the main switch on “O” (off), pull up power
plug, and make sure the bulb, the lamp house
and periphery are all cool. Then, you can do your
replacing.
Please insert the lamp gently, or it will be damaged
by excessive extrusion.
Do not touch the Halogen bulb with your hands.
It will shorten the service life or cause it to burst.
If you leave fingerprints on the surface carelessly,
clean it with a dry soft cloth.
。
Figure 4
Figure 5
3
2
1
4
1
2
3
1
3
5
6
4
2
4
