manualshive.com logo in svg

Biotek MicroFlo select, Руководство оператора

Поделиться
Скачать
Biotek MicroFlo select Скачать руководство пользователя страница 4

ii  |  MicroFlo Select™ 

BioTek Instruments, Inc. 

Notices  

BioTek

®

 Instruments, Inc. 

Highland Park, P.O. Box 998 
Winooski, Vermont  05404-0998  USA  

All Rights Reserved    

© 2010, BioTek

®

 Instruments, Inc. All rights are reserved. No part of this manual may 

be reproduced or transmitted in any form, or by any means electronic or mechanical, 
including photocopying and recording for any purpose other than the purchaser’s 
personal use without written permission of BioTek

®

 Instruments, Inc.  

Trademarks  

 

BioTek is a registered trademark, and MicroFlo™ Select, BioStack™ , and Liquid 
Handling Control™ Software are trademarks of BioTek Instruments, Inc.  
Microsoft

®

, Windows

®

 , Windows XP, Windows 2000, Windows Vista™, and Excel

®

 

are either registered trademarks or trademarks of Microsoft Corporation in the United 
States and/or other countries. 
All other trademarks are the property of their respective holders. 

Restrictions and Liabilities  

 

Information in this document is subject to change and does not represent a 
commitment by BioTek. Changes made to the information in this document will be 
incorporated in new editions of the publication. No responsibility is assumed by 
BioTek for the use or reliability of software or equipment that is not supplied by 
BioTek

 

or its affiliated dealers. 

 

Содержание MicroFlo select



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды