Biotage Isolera Four Скачать руководство пользователя

Страница: 48 / 116

411829-L, System Settings

April 2012

Page 3-12

To restore the system configuration e.g. after an update of the system's operating system:

1. Select the

Maintenance

tab in the right-hand panel.

2. Connect

the USB memory device containing the zip file with the desired system configuration to

the USB port located underneath the touch screen. Note that the zip file must be saved at
\biotage\isolera\logs\ on the USB memory device.

3. Press

Restore

Configuration

in the

System Configuration and Logs

field.

4. In the

Select Zip File

dialog, select the zip file and press

. The

Restore from USB Device

dialog opens.

5. To confirm restore, press

Restore

6. When the

Restore Successful

dialog appears, press

. The

Restart Required

dialog opens.

7. Read the instructions in the dialog on how to restart the system and then press

8. Restart the system.
9. If you have a USB printer connected to the system, set up the printer as described in “Set Up a

Printer and Auto Print of Reports” on page 3-6.

10. Verify that the calibration of the touch screen and the fraction collector is working properly. If

the system needs to be recalibrated; see “Calibrate the Touch Screen” on page 3-12 and
“Calibrate the Fraction Collector” on page 3-13.

3.7.3 Back Up and Restore the System’s Database

To back up the database:

1. Select the

Maintenance

tab in the right-hand panel.

2. If you want to save the backup on a USB memory device:

a. Connect a memory device to the USB port located underneath the touch screen.
b. Press

Back

in the

Back Up and Restore Database

field.

3. If you want to save the backup in the specified share folder, press

Back Up

in the

Back Up

and Restore Database

field. The backup file is saved at \biotage\isolera\backup\.

To restore the database:

1. Select the

Maintenance

tab in the right-hand panel.

2. If the backup file you want to use to restore the database is saved on a USB memory device

(at \biotage\isolera\backup\):

a. Connect the memory device to the USB port located underneath the touch screen.
b. Press

Restore

in the

Back Up and Restore Database

field.

3. If the backup is available in the specified share folder (at \biotage\isolera\backup\), press

Restore

in the

Back Up and Restore Database

field.

4. In the

Select Backup File

dialog, select the backup file and press

. The

Restore from USB

Device/Share Folder

dialog opens.

5. To confirm restore, press

Restore

3.7.4 Calibrate the Touch Screen

If the touch screen needs to be recalibrated, use the following procedure.

1. Select the

Maintenance

tab in the right-hand panel.

2. Press

Calibrate

in the

Touch Screen

field. Read and follow the instructions that appear on the screen.

Содержание Isolera Four





















































































































Результаты поиска

Содержание Isolera Four

Отзывы:

Похожие инструкции для Isolera Four

Бренды по названию

Популярные бренды

Biotage Isolera Four, Руководство пользователя

Результаты поиска

Содержание Isolera Four

Отзывы:

Похожие инструкции для Isolera Four

Бренды по названию

Популярные бренды