411829-L, System Settings
April 2012
Page 3-6
3
Figure 3-6. Network Tab
To configure the network connection:
1. Connect a shielded category 5 TP cable to the
ETHERNET
port.
2. Select the
Network
tab in the right-hand panel.
3. Select the
Network Type
text box and select
Dynamic
or
Static
.
4. Edit the network settings in the
Network
field. For more information, contact your IT
administrator. (To reset changes that have not been applied, press
Reset
.)
5. To apply your new settings, press
Apply
.
6. For the network configurations to take effect, restart the system:
a. Press
Main Menu
and then
Shut Down
.
b. When the message
It is now safe to turn off the system
appears on the screen, turn off
the system. The power switch is located underneath the touch screen.
c. Turn on the system.
To access the Isolera Remote Viewer:
1. Enter the URL
http://MACHINENAME
in a web browser (where MACHINENAME is the hostname
or the host IP address entered in the
Network
field above).
Tip!
You can also find the
hostname and host IP address in the About dialog at the main menu.
2. Press
ENTER
and the Isolera Remote Viewer web page is loaded. The page is automatically
updated every five seconds.
3.5 Change Report Settings
3.5.1 Set Up a Printer and Auto Print of Reports
If you want reports to be automatically printed when a purification has been completed, select the
Auto Print Reports
text box at the
Reporting
tab and select
Yes
.
NOTE
If connecting a network printer, only printers with postscript
support can be used with the system.
To connect a USB printer to the system:
1. Connect your printer to the
USB
port at the rear of the system.
2. Turn the printer on.
3. Select the
Reporting
tab in the right-hand panel.
4. Select the
Printer Type
text box and select
Local
.
Содержание Isolera Four
Страница 1: ...Isolera User Manual...
Страница 66: ...411829 L Operation April 2012 Page 4 16 4 Figure 4 10 Tube Connections...
Страница 114: ......
Страница 115: ......