Biostar Z590GTA, Руководство пользователя

Страница: 23 / 196

Chapter 2: Hardware installation | 23
Z590GTA
5V_LED1/ 5V_LED2: Addressable RGB LED Device (WS2818B) Header
This header providers 5V power and Data control pins for RGB LED Device (WS2818B).
Pin Assignment
1
VCC5
2 Data
3 N/A
4 GND
Note
»
Ensure proper pin connecting to your LED device, wrong connection may damage your LED device or
motherboard.
»
The 12V_LED connector supports to 5050 RGB LED strips with the maximum power rating of 3A
(12V).
»
The 5V_LED connector supports up to 300 LEDs WS2818B individually Addressable RGB LED strips
with the maximum power rating of 3A (5V).
»
Please use the Vivid LED DJ software to control the LEDs. For detailed software setting information,
refer to chapter 3.3 .
2.8 LEDs
Debug LED: Debug LED Indicators
This LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates booting device is not detected
or fail.
Note
»
After starting the computer, the LED indicators will light up in the following order:
DRAM → CPU → VGA → BOOT
»
When the computer is ready, the LED indicator will show where the error occurred and will stay on
until the problem is solved.
»
After the computer is started, the Debug LED will not light up if there is no abnormality detected.