Biostar Z170GT7, Руководство пользователя

Страница: 17 / 79

Chapter 2: Hardware installation | 17
Z170GT7
JSPDIFOUT1: Digital Audio-out Connector
The connector is for connecting the S/PDIF output bracket.
Pin Assignment
1
+5V
2 SPDIF_OUT
3 Ground
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the chassis-mount front panel audio I/O which supports HD
and AC’97 audio standards.
HD Audio AC’97
Pin Assignment Pin Assignment
1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out
10 Jack Sense 10 LFT Line Out
Note
»
It is recommended that you connect a high-definition front panel audio module to this connector to
avail of the motherboard’s high definition audio capability.
»
Please try to disable the “Front Panel Jack Detection” if you want to use an AC’97 front audio output
cable. The function can be found via O.S. Audio Utility.
5050_RGBLED1: RGB LED Strip (5050 SMD) Header
This header providers 12V power and RGB control pins for RGB LED strip (5050 SMD).
Pin Assignment
1
VCC12
2 LED_GREEN
3 LED_RED
4 LED_BLUE
Note
»
Ensure proper pin connecting to your LED strips, wrong connection may damage your LED strips or
motherboard.