Biostar Z170GT7, Руководство пользователя

Страница: 15 / 79

Chapter 2: Hardware installation | 15
Z170GT7
ATXPWR2: ATX Power Source Connector
The connector pr12V to the CPU power circuit. If the CPU power plug is 4-pin, please
plug it into Pin 1-2-5-6 of ATXPWR2.
Pin Assignment
1
+12V
2 +12V
3 +12V
4 +12V
5 Ground
6 Ground
7 Ground
8 Ground
Note
»
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors
have been plugged-in.
»
Insufficient power supplied to the system may result in instability or the peripherals not functioning
properly. Use of a PSU with a higher power output is recommended when configuring a system with
more power-consuming devices.
PANEL1: Front Panel Header
This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection.
Pin Assignment Function Pin Assignment Function
1 +5V
Speaker
Connector
9 N/A
N/A
2 N/A 10 N/A
3 N/A 11 N/A N/A
4 Speaker 12 Power LED (+)
Power LED 5 HDD LED (+) Hard drive
LED 13 Power LED (+)
6 HDD LED (-) 14 Power LED (-)
7 Ground Reset
button
15 Power button Power-on
button 8 Reset control 16 Ground
TPM1: Trusted Platform Module Header (TPM1.2)
This header allows you to store cryptographic keys that protect information.
Pin Assignment Pin Assignment
1 CLK_PCI_TPM 2 Ground
3 LFRAME# 4 Key
5 PL_RST2# 6 VCC5
7 FWH3 8 FWH2
9 VCC3_3 10 FWH1
11 FWH0 12 Ground
13 SMBCLK 14 SMBDATA
15 AUX33 16 SERIRQ
17 Ground 18 CLK_RUN#
19 SUS_STAT# 20 LDRQJ1