BIOS Setup
- 22 -
system which has been powered down.
The Choices: Off
(default), On.
LPT & COM
When this option is set to
On
, any event occurring at a
COM(serial)/LPT (printer) port will awaken a system which has been
powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to
On
, any event occurring on a hard drive or a
floppy drive will awaken a system which has been powered down.
The Choices: On
(default), Off.
PCI Master
When set to
On
, you need a LAN add-on card which supports the
power function. It should also support the wake-up on LAN jump.
The Choices: Off
(default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
The Choices: Disabled
(default), Enabled.
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card which support
power on function. It should also support the wake-up on LAN jump.
Disabled
(default) Wake up on LAN/Ring not supported.
Enabled
Wake up on LAN/Ring supported.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices:
Enabled,
Disabled
(default).
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when “RTC Resume” is set to “Enabled”.
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up.
This field is only configurable when “RTC Resume” is set to “Enabled”.
IRQs Activity Monitoring
