PT880 Pro-A7 DDR2
31
USB Resume from S3
This item allows you to enable or disabled USB resume from S3.
The Choices: Disabled
(default), Enabled.
VGA
When set to
On
, any event occurring at a VGA Port will awaken a system which has
been powered down.
The Choices: Off
(default), On.
LPT & COM
When this option is set to
On
, any event occurring at a COM (serial)/LPT (printer) port
will awaken a system which has been powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to
On
, any event occurring on a hard drive or a floppy drive
will awaken a system which has been powered down.
The Choices: On
(default), Off.
PCI Master
When set to
On
, you need a LAN add-on card which supports the power function. It
should also support the wake-up on LAN jump.
The Choices: Off
(default), On.
Wake Up On PCI Express
The Choices: Disabled
(default), Enabled.
Power On by PCI Card
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
The Choices: Disabled
(default), Enabled.
Modem Ring Resume
The Choices: Disabled
(default), Enabled.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
The Choices:
Enabled,
Disabled
(default).
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when “RTC Resume” is set to “Enabled”
