PT880 Pro-A7 DDR2
18
Write to Read <TWtr>
The Choices:
1T/2T, 2T/3T.
Write Recovery Time<TWr>
The Choices:
2T, 3T, 4T, 5T.
DRAM BUS Selection
The Choices: Auto
(default), Single Channel, Dual Channel.
RDSAIT/RDSBIT Mode
The Choices: Auto
(default), Manual.
RDSAIT/RDSBIT Selection
The Choices:
0~3F.
DRAM Command Rate
This item controls clock cycle that must occur between the last valid write
operation and the next command.
The Choices:
1T Command,
2T Command
(default).
AGP & P2P Bridge Control
If you highlight the literal “Press Enter” next to the “AGP & P2P Bridge Control” label and
then press the enter key, it will take you a submenu with the following options:
