P4M80-M7 BIOS Manual
13
3
.11 Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices:Disabled
(default), Enabled.
3.12 Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have 40 or 80 tracks.
Disabling this option reduces the time it takes to boot-up.
The Choices:Enabled
(Default), Disabled.
3.13 Boot Up NumLock Status
Selects the NumLock. State after power on.
The Choices:On
(default) Numpad is number keys.
Off Numpad is arrow keys.
3.14 Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the keyboard
controller. When enabled, the typematic rate and typematic delay can be configured.
The Choices:Disabled
(default), Enabled.
3.15 Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices:6
(default)
,
8, 10, 12, 15, 20, 24, 30.
3.16 Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The Choices:250
(default)
,
500,750,1000.
