NF44X-A7
17
Serial ATA Connectors: JSATA1~JSATA4
The motherboard has a SATA Controller in nForce4 4X SLI with 4 channels
SATA interface, it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
4
1
7
JSATA1
JSATA2
JSATA3
JSATA4
7 Ground
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 close:
Normal Operation (Default).
3
1
JCMOS1
1
3
Pin 2-3 close:
Clear CMOS data.
Clear CMOS Procedures:
※
1.
Remove AC power line.
2.
Set the jumper to “Pin 2-3 close”.
3.
Wait for five seconds.
4.
Set the jumper to “Pin 1-2 close”.
5.
Power on the AC.
6.
Reset your desired password or clear the CMOS data.