NF325-A9 BIOS SETUP
32
9 Voltage Control
Figure 9. Voltage Control
CPU Voltage
This item allows you to select CPU Voltage Control.
The Choices: Default
(default), +1.7%, +3.4%, +5.1%.
DDR Voltage
This item allows you to select DDR Voltage Control.
The Choices: Default
(default), 2.75V, 2.85V, 2.90V.
AGP Voltage
This item allows you to select AGP Voltage Control.
The Choices: Default
(default)
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as
“ON” status. All the CMOS data will be loaded as defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed. This
action will boot-up the system according to FSB of the processor.