Chapter 2
BIOS Setup
2-25
The above settings will be shown on the screen only if “Manual” is chosen for the
resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and
provides non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is
assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled
(default), Enabled.
Resources Controlled By
By Choosing “
Auto(ESCD)
” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral.By Choosing “Manual”, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on
the type of device using the interrupt. When you press the “Press Enter” tag, you
will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “Resources Controlled By” is set to
“Manual”.
IRQ-3 assigned to
PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to
PCI Device
IRQ-7 assigned to
PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to
PCI Device
IRQ-11 assigned to
PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to
PCI Device
IRQ-15 assigned to
PCI Device
Содержание M7TTB
Страница 72: ...12 26 2001 MADE IN TAIWAN R O C ...
