Biostar M7TTB, Руководство пользователя

Страница: 17 / 72

Chapter 1 Motherboard Description
1-12
1.4 RAM Module Installation
1.4.1 RIMM
DRAM Access Time: 2.5V Unbuffered with ECC RAM BUS Type required.
DRAM Type: 64MB/ 128MB/ 256MB/512MB RIMM Module (184 pin)
Total Bank 0 Bank 1
Memory Size (MB) RIMM1/2 RIMM3/4
128 M 64M x 2 pc Dummies RDRAM
128 M Dummies RDRAM 64M x 2 pc
256 M 64M x 2 pc 64M x 2 pc
256 M 128M x 2 pc Dummies RDRAM
256 M Dummies RDRAM 128M x 2 pc
512 M 128M x 2 pc 128M x 2 pc
512 M 256M x 1 pc Dummies RDRAM
512 M Dummies RDRAM 256M x 1 pc
1024 M 256M x 2 pc 256M x 2 pc
1024 M 512M x 1 pc Dummies RDRAM
1024 M Dummies RDRAM 512M x 1 pc
2048 M 512M x 2 pc 512M x 2 pc
*The list shown above for RDRAM configuration is only for reference.
Bank 0 => RIMM1 and RIMM2, Bank 1=> RIMM3 and RIMM4
At least you should insert two RAM BUS RIMM modules into the RIMM
sockets (must be in Bank 0 or Bank 1), we strongly suggest to use the same type of
modules including the model, speed and size of memory.
When you insert two RAM BUS RIMM modules into the RIMM sockets, the
other two RIMM sockets must insert two dummies of RAM BUS RIMM modules.
It is necessary for this motherboard to insert the entire four RIMM sockets.