8 |
Chapter 2: Hardware installation
Step 1: Align a DIMM on the slot such that the notch on the DIMM matches the break on the
Slot.
Step 2: Insert the DIMM firmly into the slot until the retaining chip snap back in place and the
DIMM is properly seated.
Note
»
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Memory Capacity
DIMM Socket Location DDR3L Module
Total Memory Size
DIMMA1
512MB/1GB/2GB/4GB/8GB
Max is 16GB.
DIMMB1
512MB/1GB/2GB/4GB/8GB
Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
DIMMA1
DIMMB1
Disabled
O
X
Enabled
O
O
(O means memory installed, X means memory not installed.)
Note
»
When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.
