K8VBK-S7 BIOS Setup
27
5.3.5 UR2 Duplex Mode
Select the value required by the IR device connected to the IR port. Full-duplex mode
permits simultaneous two-direction transmission. Half-duplex mode permits
transmission in one direction only at a time.
The Choices: Half
(default), Full.
5.3.6 Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which
I/O Address.
The Choices:
378/IRQ7
(default), 278/IRQ5, 3BC/IRQ7, Disabled.
5.3.7 Parallel Port Mode
The default value is SPP.
The Choices:
SPP
(default)
Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
5.3.8 ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices:
3
(default), 1.
