Biostar GAMING Z170X, Руководство пользователя

Страница: 17 / 87

Chapter 2: Hardware installation | 17
GAMING Z170X
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the chassis-mount front panel audio I/O which supports HD
and AC’97 audio standards.
HD Audio AC’97
Pin Assignment Pin Assignment
1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out
10 Jack Sense 10 LFT Line Out
Note
»
It is recommended that you connect a high-definition front panel audio module to this connector to
avail of the motherboard’s high definition audio capability.
»
Please try to disable the “Front Panel Jack Detection” if you want to use an AC’97 front audio output
cable. The function can be found via O.S. Audio Utility.
2.8 Buttons & Indicators
On-Board Buttons
CL_CMOS_BTN:
Press the button 1~2 seconds to load the BIOS defaults.
SW_XMP:
This is an on-board XMP Switch button which will make installing RAM with Intel XMP
profiles. The led will light when the XMP profiles are activated.
Note
»
You must reboot your computer for the changes to take effect.
»
Please make sure that your memory modules support XMP.