28 |
Chapter 3: UEFI BIOS & Software
Vivid LED DJ
Vivid LED DJ can adjust your color scheme of VIVID LED ARMOR , MOSFET Heatsink LED , RGB
LED Device and Southbridge Heatsink LED.
1. LED Type:
Select the LED lighting blocks.
• System :
System LED illuminations. (MOSFET Heatsink LED, Southbridge Heatsink LED)
• RGB Header 1 :
The hearder 1 LED illumination. (RGB LED Device)
• RGB Header 2 :
The hearder 2 LED illumination. (RGB LED Device)
• RGB Audio :
The RGB Audio LED illumination. (On board LED or VIVID LED ARMOR)
2. Default:
All the setting are back to default.
3. ON/OFF:
To enable or disable VIVID LED function.
4. ON/OFF:
Allows you to enable or disable VIVID LED of a single item.
5. Color Palette:
Allows to you choose specific color of the LEDs.
6. LED Brightness Bar:
Allows you to adjust the LED brightness.
7. Auto:
LEDs will Automatically change the Color Palette and LED Brightness.
»
If you select Auto mode, the Color Pallette and LED Brightness Bar will disabled.
8. LED SPARKLE:
Allows to you choose sparkle of the LEDs.
• Permanent:
LEDs are constantly lit.
• Shine:
LEDs flash at a specific frequency.
• Breath:
LEDs gradually flash on and off.
• Shine & Music:
LEDs will flash according the music played on your system.
»
Please make sure your speaker or earphone is properly connected to audio jack before using RACING
GT EVO program.
