Biostar B360-BTC PRO 2.0, Руководство пользователя

Страница: 15 / 58

Chapter 2: Hardware Installation | 15
TB360-BTC PRO 2.0 / TB360-BTC PRO 3.0
2.7 Headers & Connectors
ATXPWR1/ ATXPWR2: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power supply for this
connector. Make sure to find the correct orientation before plugging the connector.
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby 5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
ATXPWR3: ATX Power Source Connector
The connector pr12V to the CPU power circuit. If the CPU power plug is 4-pin, please
plug it into Pin 1-2-5-6 of ATXPWR3.
Pin Assignment
1
+12V
2 +12V
3 +12V
4 +12V
5 Ground
6 Ground
7 Ground
8 Ground
Note
»
Before you power on the system, please make sure that both ATXPWR1/ ATXPWR2 and ATXPWR3
connectors have been plugged-in.
»
When there is only one power supply, the 24-pins ATX power connector must be connected to
ATXPWR1, otherwise it will not boot.
»
When there are two power supply, please install the first power supply and connect the 24-pins ATX
power connector to ATXPWR1 and the 8-pins ATX power connector to ATXPWR3. After installing the
second power supply, the 24-pins ATX power connector is connected to ATXPWR2. If it is installed
incorrectly, the motherboard will be damaged.
»
Insufficient power supplied to the system may result in instability or the peripherals not functioning
properly. Use of a PSU with a higher power output is recommended when configuring a system with
more power-consuming devices.