9
Prox-E Installation Guide v1.2|10.2018|en
4.
Place controller on wall and fix it with self-tapping screws.
5.
Connect power supply, readers, locks, and buttons, if needed, according to p.2.5-2.11 . Put
cables through previously made holes.
6.
Attach the covering and fix the retaining screw.
Mounting on DIN-rail
1.
Place the lower clip on the edge of the rail.
2.
Pull the upper clip (2) with a slot-head screwdriver.
3.
Press the controller to the DIN rail (1), the upper clip must snap under the pressure of the
spring.
