Electrooculography (EOG)
User Manual
11 of 17
Figure 11: Enabling the device for acquisition.
Click on the biosignalsplux logo to access the available settings. Select the channel your sensor is
connected to and select the
RAW
from the dropdown menu highlighted in the next screenshot, as the
EOG
option is not yet available (after the acquisition, the acquired data should be converted to the
physical units using the above presented transfer function).
Figure 12: Set the channel type of the channel you have your EOG sensor connected to, to
EOG
.
Activate the channel for acquisition by clicking on the circle next to the channel type (must be blue). If
not done before, follow the instruction available in section
3.1 Connecting the sensor to biosignalsplux Systems
device to your biosignalsplux device. Click on the record button in the OpenSignals main interface
whenever you’re ready for your acquisition.
