8
Figure 4-2: Bioscreen C° Pro back view.
5 Installation
5.1 Instrument Installation
Note:
When moving the Bioscreen C° Pro, it is
recommended that two people lift the instrument
together to avoid personal injury. Be sure to lift
the instrument from the metal frame at the
bottom to avoid injury and/or damage to the
instrument. Always lift from the metal frame only.
Lifting from the white plastic covers is not
allowed as the plastic parts will break.
Note:
Unpack the instrument according to printed
Bioscreen C° Pro Quick Guide which you can find
inside the shipping carton.
When unpacking the instrument, please check to
ensure that all of the following parts are included:
1. Bioscreen C° Pro Instrument
2. Bioscreen Memory Stick
Bioscreen C° Pro Operating Manual
BioScreener PRO SW User Guide
Bioscreen C° Pro Quick Guide
BioScreener PRO Software
3. Thermo Cassette
4. Power Adapter
5. Power Cable
6. Ethernet Cable
7. Honeycomb Plates (4 pcs)
8. Bioscreen C° Pro Quick Guide
Contact your Oy Growth Curves Ab Ltd
representative immediately if any of these items
are missing.
The area designated for the instrument should be
free of dust, liquids and acidic vapors. The table's
surface should be flat and even. Avoid areas
subject to vibrations and direct sunlight.
A minimum of 10 centimeters of open space is
required on both sides of the instrument. Space
in front of the instrument is required to access
the measurement chamber door.
After unpacking and positioning the instrument,
please do the following steps in the given order:
1. Install the BioScreener PRO software.
2. Plug in power and Ethernet cable.
3. Check settings for Bioscreen C° Pro with
the device user interface (refer to
Chapter 5.3.5).
Follow the instructions in the next chapters.
5.2 Software Installation
5.2.1 BioScreener PRO Software
BioScreener PRO Software that is installed on a
local computer is needed to access Bioscreen C°
Pro instrument. Software is used to create
experiment protocols and upload them to the
Bioscreen C° Pro. After the experiment run is
completed software is used to download the
results from the Bioscreen C° Pro to the computer
for further processing.
Note:
BioScreener PRO Software is compatible with
Windows 10 operating system.