13
7.7.
When I was disassembling/assembling the plate, I found some
breaks / scratches on the glass. What should I do
?
If the breaks/scratches are only localized outside the plate’s aper-
tures, it is ok, although check regularly if it did not expand to the ap-
erture. In the cases the breaks/scratches are in the apertures, contact
the technical support for further action.
7.8.
The glass ID number stickers can be seen in the apertures. Is
this OK
?
The working aperture of the HiPo MPP-96 is only 2 mm in diameter,
so if you have received the plate with some small part of the stickers
located inside the bigger aperture (6.8 mm in diameter), it is OK.
7.9.
My problem is not described here
.
While doing the verification process, a problem that is not described
here may arise. Contact the technical support in such cases.
8.
Storage
Always store the OD Plate in its own case when not in use to keep
the glass surface free of dust. In general, avoid storage sites with excessive
dust, dirt, moisture or large temperature fluctuations.
