6
4. Getting started
4.1.
Unpacking.
Remove packing materials carefully and retain them for future shipment
or storage of the unit. Examine the unit carefully for any damage incurred during
transit. The warranty does not cover in-transit damage. Warranty covers only the units
transported in the original package.
4.2.
Complete set.
Package contents:
4.2.1.
MS-3000
:
-
MS-3000, Magnetic Stirrer .............................................................................. 1 pce.
-
Magnetic stirring element
1
................................................................................ 1 pce.
-
External power supply ..................................................................................... 1 pce.
-
Operating manual, declaration of conformity .................................................. 1 copy
4.2.2.
MMS-3000
:
-
MMS-3000, Magnetic Stirrer ........................................................................... 1 pce.
-
SR-1, attachable stand ..................................................................................... 1 pce.
-
Magnetic stirring element
1
................................................................................ 1 pce.
-
External power supply ..................................................................................... 1 pce.
-
Operating manual, declaration of conformity .................................................. 1 copy
4.3.
Setup
.
-
Place the unit on horizontal even working surface.
-
Connect the external power supply unit into the socket at the rear side of the unit
and position the unit for an easy access to the external power supply and the power
switch.
4.4.
SR-1
stand installation on
MMS-3000
. Remove the screw on the fixing socket at the
back of the stirrer (fig. 1/1). Screw in the part of the stand with the counter-nut into
the fixing socket and secure with the counter-nut. Screw in the second part of the
stand into the attached first part.
Figure 1. SR-1 stand for MMS-3000
1
Cylindrical (6x25 mm) and encapsulated in PTFE