9
6. Maintenance
6.1.
If the unit requires maintenance, disconnect the unit from the electric circuit and con-
tact Biosan or your local Biosan representative.
6.2.
All maintenance and repair operations must be performed only by qualified and spe-
cially trained personnel.
6.3.
Care and Cleaning
6.3.1. Standard ethanol (75%) or other cleaning agents recommended for cleaning and de-
contamination of the stainless steel surfaces.
6.3.2. For decontamination, it is recommended to use a special DNA/RNA removing solu-
tion (e.g. DNA-Exitus Plus
TM
, RNase-Exitus Plus
TM
).
6.4.
Fuse replacement.
Disconnect the power cord from electric circuit. Disconnect the power cable from the
socket on the rear of the shaker-incubator. Open the fuse holder. Check and replace
with the correct fuse if necessary: for 230 V, M 3.15 A or for 120 V, M 5.0 A (type
M
- time lag:
M
edium).
Fig. 2. Fuse replacement
